Premium Homebrew Nitro Kegerator Upgrade Kit
A premium all in one solution to adding a full nitrogen dispensing solution to your existing kegerator setup*
This upgrade kit for a kegerator or keezer setup lets you dispense a delicius creamy nitro beer or coffee from any ball lock keg. Comes with disposable N2 cylinder and high quality Mini 360 regulator and custom N2 cylinder adaptor, along with gas line and disconnect for you keg. Simply hook the keg up to nitrogen with the included fittings and N2 cylinder and regulator and swap out the existing NukaTap for a premium SS Nitro Tap (which incorporates the creamer disk that is an essential part of getting a beautiful, cascading nitro head on your beverage!).
Once hooked up, you will want to crank the pressure to around 30psi to get the full nitro effect!
Nitrogen is used in these setups as it does not readily dissolve into solution,. This allows us to dispense at high pressures through a creamer disk in the spout or tap. This is how the delicous, creamy, cascading nitrogen pour is achieved.
We love stouts and porters, nitro coffee, even dark lagers and Belgian beers on nitro at KegLand - you will be surprised at how many styles benefit from a touch of nitro!
Included in this kit:
1 x KL03674 Stainless Stout/Nitro Coffee Tap
1 x KL15868 Mini 360 Core Actuator Regulator - Pin Actuator / Piercer
1 x KL32087 Nitrogen Adaptor for Mini 360 Core Adaptor
1 x KL25317 2.2L Nitrogen Disposable Gas Cylinder (N2)
1 x KL06224 EVABarrier 4mm ID x 8mm OD x 12m Roll - Double Wall EVA (gas line and additional beer line if needed)
1 x KL20756 duotight 8mm (5/16) x Ball Lock Disconnect - (Grey + Red Gas)
1 x KL07481 duotight - 6.35mm (¼') Female x 8mm (5/16') Female Reducer
Directions for use
This bottle is compatible with our Mini 360 Core Actuator Regulator with an adaptor for 2.2L Nitrogen Cylinders.
1. Remove the protection cap from the valve.
2. Screw the adaptor for Nitrogen Cylinders (G1/2" x M10 Female) into the Mini 360 Core Actuator Regulator. Note: You may need to remove the reducing bush for gas bulbs from the Mini 360 Core Actuator Regulator.
3. Connect the cylinder valve onto the regulator. It is recommended that you use a spanner to hold the neck of your Nitrogen cylinder while attaching and detaching the Mini 360 Core Actuator Regulator. Do not overtighten your cylinder into the regulator.
4. Screw the thumbscrew on the Mini 360 Core Actuator Regulator in to depress the valve on the Nitrogen Cylinder.
5. Set the outlet flow/pressure on the regulator. Please note to turn off the gas you must remove the regulator from the cylinder.
PLEASE NOTE: If you are removing the regulator at any point you MUST use a spanner to hold the brass neck of the cylinder. Failure to do so could cause the strong adhesive glue to crack and the cylinder detaches from the fitting.
6. Perform a leak test on your system.
*Stainless Stout/Nitro Coffee Tap guaranteed compatible with genuine KegLand Tap Shanks
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
A premium all in one solution to adding a full nitrogen dispensing solution to your existing kegerator setup*
This upgrade kit for a kegerator or keezer setup lets you dispense a delicius creamy nitro beer or coffee from any ball lock keg. Comes with disposable N2 cylinder and high quality Mini 360 regulator and custom N2 cylinder adaptor, along with gas line and disconnect for you keg. Simply hook the keg up to nitrogen with the included fittings and N2 cylinder and regulator and swap out the existing NukaTap for a premium SS Nitro Tap (which incorporates the creamer disk that is an essential part of getting a beautiful, cascading nitro head on your beverage!).
Once hooked up, you will want to crank the pressure to around 30psi to get the full nitro effect!
Nitrogen is used in these setups as it does not readily dissolve into solution,. This allows us to dispense at high pressures through a creamer disk in the spout or tap. This is how the delicous, creamy, cascading nitrogen pour is achieved.
We love stouts and porters, nitro coffee, even dark lagers and Belgian beers on nitro at KegLand - you will be surprised at how many styles benefit from a touch of nitro!
Included in this kit:
1 x KL03674 Stainless Stout/Nitro Coffee Tap
1 x KL15868 Mini 360 Core Actuator Regulator - Pin Actuator / Piercer
1 x KL32087 Nitrogen Adaptor for Mini 360 Core Adaptor
1 x KL25317 2.2L Nitrogen Disposable Gas Cylinder (N2)
1 x KL06224 EVABarrier 4mm ID x 8mm OD x 12m Roll - Double Wall EVA (gas line and additional beer line if needed)
1 x KL20756 duotight 8mm (5/16) x Ball Lock Disconnect - (Grey + Red Gas)
1 x KL07481 duotight - 6.35mm (¼') Female x 8mm (5/16') Female Reducer
Directions for use
This bottle is compatible with our Mini 360 Core Actuator Regulator with an adaptor for 2.2L Nitrogen Cylinders.
1. Remove the protection cap from the valve.
2. Screw the adaptor for Nitrogen Cylinders (G1/2" x M10 Female) into the Mini 360 Core Actuator Regulator. Note: You may need to remove the reducing bush for gas bulbs from the Mini 360 Core Actuator Regulator.
3. Connect the cylinder valve onto the regulator. It is recommended that you use a spanner to hold the neck of your Nitrogen cylinder while attaching and detaching the Mini 360 Core Actuator Regulator. Do not overtighten your cylinder into the regulator.
4. Screw the thumbscrew on the Mini 360 Core Actuator Regulator in to depress the valve on the Nitrogen Cylinder.
5. Set the outlet flow/pressure on the regulator. Please note to turn off the gas you must remove the regulator from the cylinder.
PLEASE NOTE: If you are removing the regulator at any point you MUST use a spanner to hold the brass neck of the cylinder. Failure to do so could cause the strong adhesive glue to crack and the cylinder detaches from the fitting.
6. Perform a leak test on your system.
*Stainless Stout/Nitro Coffee Tap guaranteed compatible with genuine KegLand Tap Shanks
